Filter
Top Products
2. Names and Functions of Parts
2-1
A : Speaker
B : Multimedia pocket
C : SD Memory Card slot
D : Battery pack
E : Headphone jack
You can connect headphones or amplified speakers.
When they are connected, audio from the internal
speakers is not heard.
F : Microphone jack
A condenser microphone can be used. If other types
of microphones are used, audio input may not be pos-
sible, or malfunctions may occur as a result.
• When recording in stereo using a stereo microphone:
Click [start] - [All Programs] - [SoundMAX] - [Control
Panel] and select [Microphone], and then add a
check mark for [No Filtering] in [Microphone
Enhancements].
• When using a monaural microphone with a 2-terminal plug:
Click [start] - [All Programs] - [SoundMAX] - [Control Panel]
and select [Microphone], and then add a check mark for
[Voice Recording] in [Microphone Enhancements].
Otherwise, only audio on the left track will be recorded.
G : Wireless LAN antenna
<Only for model with wireless LAN>
H : LCD
I : LED indicator
Caps lock
Numeric key (NumLk)
Scroll lock (ScrLk)
Multimedia pocket device status
Hard disk drive status
Power status
(Off: Power off/Hibernation, Green: Power on, Blink-
ing green: Standby, Blinking green rapidly: Cannot
power on or resume due to low temperature.)
Battery status
SD Memory Card status
(Blinking: During access or a password is requested)
Wireless ready
This indicator lights when Wireless LAN, Blue-
tooth, and/or Wireless WAN are connected and
ready. It does not necessarily indicate the On/Off
condition of the wireless connection.
Wireless WAN status
<Only for model with wireless WAN>
Refer to the instruction manual of the wireless
device
J : Power switch
K : Function key
L : Bluetooth antenna
<Only for model with Bluetooth>
M : Keyboard
N : Touch pad
O :Carrying handle
P :Wireless switch
I
C
D
E
F
B
A
G
H
J
K
L
A
I
M
N
O
P
I
I