Filter
Top Products
8
User Guide
Hardware Connections
7
Computer
Power Supply
(optional)
Tu
rntable
Powered
Speakers
or PA
DJ Mixer
CD Player /
Line Level Sources
ground
USB
Channel 1
in
Channel 2
in
1. Connect Conectiv’s RCA Outputs to your amplifier, powered monitors, or mixer.
2. Connect your stereo headphones to Conectiv’s front-panel Phones output.
3. Connect a microphone to the 1/4” Microphone input on the front panel of the interface.
4. Connect your turntables or line-level sources to Conectiv’s RCA inputs.
5. Connect Conectiv’s USB port to an available USB port on your Mac or PC computer with
a USB cable.
6. If your computer cannot supply sufficient USB bus power, or if you are using Conectiv in
standalone mode (without a computer), connect a DC power adapter to the Power jack
(13) on the rear of the interface. Conectiv requires a center-positive 9V DC 500 mA power
supply.
If you are using
turntables, be
sure to connect
each turntable’s
ground wire to
the grounding
connector (12)
on the rear of the
interface.