Filter
Top Products
MM6854/64 Dual Band GSM Data Modem
ME 820047 Issue 1.0
Page 32 03/00
5.1.61 AT+IFC – Local flow control
This command is used to control the operation of local flow control between the modem and
equipment interfacing the modem.
Enter
AT+IFC=<DCE_DTE>,<DTE
_DCE>
Where <DCE_DTE>
1
2
3
4
Where <DTE_DCE>
0
1
2
AT+IFC?
AT+IFC=?
Response
None
Xon/Xoff local
RTS
Xon/Xoff global
None
Xon/Xoff local
CTS
Displays the selected values
Displays the supported values
Notes:
None
Result codes:
OK
ERROR
5.1.62 AT+ILRR – Display local report rate
This parameter setting determines whether or not an intermediate result code of local rate is reported
at connection set-up. The rate is applied after the final result code is transmitted to/ from the modem.
Enter
AT+ILRR=0
AT+ILRR=1
AT+ILRR?
Response
Disables reporting of local port rate
Enables reporting of local port rate
Displays the current selected value
Notes:
None
Result codes:
OK
ERROR
+ILRR<speed>
5.1.63 AT+IPR – Set terminal equipment data rate
This command is used to set the data rate between the modem and the interfacing equipment.
Enter
AT+IPR=<speed>
AT+IPR?
AT+IPR=?
Response
Where speeds supported are 300, 600, 1200, 2400, 4800, 9600,
19200, 28800, 38400, 57600
Displays the current selected values
Displays the supported values
Notes:
None
Result codes:
OK
ERROR