Filter
Top Products
2
or,
2. If running DOS or Windows 3.x, configure the
modem using the included modem driver. Instructions
for installing this driver are included in the text file called
README.1ST on the Windows 95 driver disk.
The README.1ST file can be viewed by loading it
into any wordprocessor or any text editor (i.e. DOS EDIT,
NOTEPAD). It may also be viewed by using the DOS
TYPE command. Refer to your word processor manual
or DOS/Windows references for information on loading
text files.
2.3 Hardware Installation
Installation of this modem
requires opening and manipulat-
ing your PC. Exercise caution at
all times when working with AC
powered and static-sensitive
equipment. Turn off and unplug
your PC before installation. Dis-
charge any static electricity from
your body by touching any bare
metal surface of the PC system,
such as its power supply cover.
1. Turn off and unplug your com-
puter from the AC outlet.
2. Remove your computer's
cover (refer to your computer's
owner's manual).
3. Select any available half-card
slot, and then remove the slot
cover (refer to Figure 2-1).
4. Carefully slide the internal mo-
dem into the slot you have
chosen, applying even pres-
sure until the modem is com-
pletely seated in the slot.
5. Fasten the retaining bracket
with the screw from the slot
cover. Make sure the modem
is properly aligned. Store the
slot cover for future use.
Figure 2-1
Expansion
Slots
LINELINE
LINELINE
LINE
Figure 2-2
Back
Plate
PHONEPHONE
PHONEPHONE
PHONE
MICMIC
MICMIC
MIC
SPKSPK
SPKSPK
SPK