Filter
Top Products
8
-
9
-
10
DM
CS1000 Code Scanner
OB15-11
131
SEE ME-SFI INJECTION FOR ALL DIAGNOSTIC CODES FROM 8/96 PRODUCTION AND LATER FOR
ALL MODELS.
Engines Model Years
104 119 120 1991-96
Connect wires of Scanner as follows
Scanner Data Link Connector 16-pin
Yellow Socket 3
Black Socket 1
Red Socket 16
Scanner Data Link Connector 38-pin
Yellow Socket 19
Black Socket 1
Red Socket 3
DM 8 for “Current”, 9 “Stored” and 10 “Registered” Fault Codes
DTC Readout Possible Cause of Failure
000 No fault found
002 Oxygen sensor. No signal (right bank in 120)
003 Fuel adaptation (lambda control), inoperative. Engine control module (right bank in 120)
004 Air injection defective, fault from Fuel control system (right bank in 120)
005 EGR exhaust gas recirculation incorrect, fault. Engine control module (right bank in 120)
006 Idle speed control incorrect, fault from EA/CC/ISC
007 Ignition system defective, fault from Fuel/Ignition control system (right bank in 120)
008 Coolant temperature sensor signal. Open or short circuit (right bank in 120)
009 Intake air temperature sensor signal. Open or short circuit (right bank in 120)
010 Air mass sensor voltage signal too high /low. (right bank in 120)
011 Engine speed signal TN (RPM) or Engine control module (right bank in 120) defective
012 Oxygen sensor heater circuit. Open or short circuit (right bank in 120)