Metrologic Instruments Laser Scanner Scanner User Manual


 
23
EAS DEACTIVATION ANTENNA
SW1 and SW2 are the switch banks inside the CheckPoint Device that set the
deactivation range. Metrologic recommends end users program the MS7220 to
the Fixed Low-Density depth of field, so that the unit does not scan out beyond
the deactivation range.
Unit #
CheckPoint Recommended
Switch Bank Settings
MS7220 Depth of Field
Settings
MS7320
SW1 & SW2
switches 2, 3, 4, 5, and 6 set to ON
Default
*Note: Minimum element width changes to 6.8 mil when in this mode.
Figure 14: EAS Deactivation Antenna
Contact Checkpoint Systems directly for additional EAS support
.
MAINTENANCE
Smudges and dirt can interfere with the proper scanning of a bar code.
Therefore, the output window will need occasional cleaning.
1. Spray glass cleaner onto lint free, non-abrasive cleaning cloth.
2. Gently wipe the scanner window.