Filter
Top Products
15
SCALE/LOAD CELL CONFIGURATION BAR CODES
Dual Cable Scale Configuration Bar Codes
COM Port Settings (Baud Rate)
The following bar codes will change scale parameters intended for a
Dual Cable environment.
If a Scale Protocol bar code from page 11 or 13 is used, the bar codes
below must be scanned after the Scale Protocol bar code in order to be
effective.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = 19200 Baud Rate
³996019
Set the scale baud rate for dual cable
applications to 19200 baud.
Scale = 38400 Baud Rate
³996020
Set the scale baud rate for dual cable
applications to 38400 baud.