Metrologic Instruments MS2xxx Series Scanner User Manual


 
17
SCALE/LOAD CELL CONFIGURATION BAR CODES
Dual Cable Scale Configuration Bar Codes
COM Port Settings (Data Bits & Parity)
The following bar codes will change scale parameters intended for a
Dual Cable environment.
If a Scale Protocol bar code from page 11 or 13 is used, the bar codes
below must be scanned after the Scale Protocol bar code in order to be
effective.
The MS2xx0 must be in scale program mode to use these bar codes.
Scale = 8 Data Bits, No Parity
³996023
Set the scale communication parameters to
8 data bit, no parity.
Scale = Odd Parity
³996024
Set the scale communication to odd parity.