Metrologic Instruments MS6130 Scanner User Manual


 
31
APPENDIX A (CONTINUED)
Specifications of Battery Pack
Battery Type: “AA” NiCd Rechargeable
Configuration: 3 Batteries/Pack
Nominal Voltage: 3.6 VDC
Maximum Voltage: 4.8 VDC
Capacity: 600 mA
Charge Cycles: Over 500 Full Charge/Discharge
Charge Time: 4 Hours
Short Circuit Protection: Auto/Reset Fuse 1.7A Hold Current
Temperature Characteristics (Degrees Celsius) of each Cell:
Charge: 0 to +45
Discharge: -20 to +60
Storage (Long): -30 to +35
UK Compliance
To charge the batteries in the MS6130 - 418MHz, remove the ESD cover
from the bottom of the unit. Refer to the battery charge rate for additional
information. After a full charge, replace the cover over the battery contacts.
The cover should remain in place during operation