Metrologic Instruments MS6130 Scanner User Manual


 
37
APPENDIX D
Warranty and Disclaimer
Limited Warranty
The MS6130 scanners are manufactured by Metrologic at its Blackwood, New Jersey,
U.S.A. facility. The MS6130 scanners have a two (2) year limited warranty from the
date of manufacture. Metrologic warrants and represents that all MS6130 scanners
are free of all defects in material, workmanship and design, and have been produced
and labeled in compliance with all applicable U.S. Federal, state and local laws,
regulations and ordinances pertaining to their production and labeling.
This warranty is limited to repair, replacement of Product or refund of Product price at
the sole discretion of Metrologic. Faulty equipment must be returned to the Metrologic
facility in Blackwood, New Jersey, U.S.A. or Puchheim, Germany. To do this, contact
Metrologic’s Customer Service/Repair Department to obtain a Returned Material
Authorization (RMA) number.
In the event that it is determined the equipment failure is covered under this
warranty, Metrologic shall, at its sole option, repair the Product or replace the
Product with a functionally equivalent unit and return such repaired or replaced
Product without charge for service or return freight, whether distributor,
dealer/reseller, or retail consumer, or refund an amount equal to the original
purchase price.
This limited warranty does not extend to any Product which, in the sole judgement
of Metrologic, has been subjected to abuse, misuse, neglect, improper installation,
or accident, nor any damage due to use or misuse produced from integration of the
Product into any mechanical, electrical or computer system. The warranty is void if
the case of Product is opened by anyone other than Metrologic’s repair department
or authorized repair centers.
THIS LIMITED WARRANTY, EXCEPT AS TO TITLE, IS IN LIEU OF ALL OTHER
WARRANTIES OR GUARANTEES, EITHER EXPRESS OR IMPLIED, AND
SPECIFICALLY EXCLUDES, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE UNDER
THE UNIFORM COMMERCIAL CODE, OR ARISING OUT OF CUSTOM OR
CONDUCT. THE RIGHTS AND REMEDIES PROVIDED HEREIN ARE
EXCLUSIVE AND IN LIEU OF ANY OTHER RIGHTS OR REMEDIES. IN NO
EVENT SHALL METROLOGIC BE LIABLE FOR ANY INDIRECT OR
CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES TO
PERSON OR PROPERTY, OR EFFECT ON BUSINESS OR PROPERTY, OR
OTHER DAMAGES OR EXPENSES DUE DIRECTLY OR INDIRECTLY TO THE
PRODUCT, EXCEPT AS STATED IN THIS WARRANTY. IN NO EVENT SHALL
ANY LIABILITY OF METROLOGIC EXCEED THE ACTUAL AMOUNT PAID TO
METROLOGIC FOR THE PRODUCT. METROLOGIC RESERVES THE RIGHT
TO MAKE ANY CHANGES TO THE PRODUCT DESCRIBED HEREIN.
North America Headquarters
Metrologic Instruments, Inc. Customer Service: 1-800-ID-METRO
90 Coles Road Tel: 856-228-8100
Blackwood, NJ 08012-4683 Email: info@metrologic.com
Website: www.metrologic.com
Germany
Metrologic Instruments GmbH Tel: 49-89-89019-0
Dornierstrasse 2 Fax: 49-89-89019-200
82178 Puchheim b. Email: info@europe.metrologic.com
Munich, Germany