Filter
Top Products
Secure your installation power continuity
Anticipate needed maintenance actions thanks to automatically displayed warnings:
Reset or disable LCM
In case of any LCM messages displayed:
◗ For temporary reset: Press ESC for more than 3 seconds in the Status and Alarm screen, to temporarily cancel the
alarm status. The alert will be repeated twice in 30 days.
◗ For permanent reset: Press ENT for more than 3 seconds in the LCM warning screen, to permanently cancel this
LCM event.
At any time:
To Disable all LCM messages select "disable all", in LCM menu with LCD navigation.
You will not be aware of any LCM events that can happen on the UPS if you disable all LCM messages.
LCM warning details Signification
END OF WARRANTY
SOON CONTACT MGE AT
www.mgeups.com/lcm
Get your product warranty extension by contacting MGE UPS SYSTEMS at www.mge-
ups.com/lcm
BATTERY CHECK
RECOMMENDED
CONTACT MGE AT
www.mgeups.com/lcm
Battery is approaching its reliability end of life. Risk of dramatically reduced
backup time
TECHNICAL CHECK
RECOMMENDED
CONTACT MGE AT
www.mgeups.com/lcm
Wearing parts of your product must be checked
OPERATION LIMITS
REACHED.
CONTACT MGE AT
www.mgeups.com/lcm
One of the following parameters is close to the limit of your product: Autonomy, time with
mains 2 out of tolerance, overloads load level in %, battery environment temperature
Pulsar MX
Life Cycle Monitoring (LCM)
6 — 2
86-87050-00 A01