Filter
Top Products
ENERGIZE YOUR ENTERPRISE
Network Management Card
– User Manual 34003991EN/DA Page 8/120
1.1.4.1 How to connect UPS / agent / network:
Insert the optional card in the UPS and connect the UPS to the computer network.
Start the MGE Office Protection Systems UPS, then the computers.
1.1.4.2 Setting up the protection:
Set up the Network Management Card (see user manual).
Install and configure the Network Shutdown Module on all machines that are to be protected by the UPS.
The software components for each platform and the user manuals are on the Solution-Pac-2 CD or are available for
download on the
www.mgeops.com Web site, in the
“Downloads” section.
1.2 Presentation of the Network Management Card (NMC)
1.2.1 Compatibility with UPSs
The Minislot Network Management Card is compatible with the following UPSs:
Pulsar Evolution 500/800/1100 From technical level
06
Pulsar Evolution 2200/3000 From technical level
05
Pulsar Evolution 1500 From technical level
05
EXtreme C 700/1000/1500 From technical level
B2
EXtreme C 2200 - 3200 From technical level
02
Pulsar EX 700/1000/1500 RT (US°) From technical level
03
Pulsar EX 2200/3200 (US°) From technical level
09
Pulsar M 2200/3000 All models
Pulsar 700/1000/1500 All models
Evolution 650/850/1150/1550/2000 All models
Evolution S 1250/1750/2500/3000 All models
Pulsar MX 4/5/10 All models
Pulsar MX 15/20 All models
EX 5 / 7 / 11 RT Equipped with a card minislot (Q2 08)
EX 5 / 7 / 11 RT 3 : 1 Equipped with a card minislot (Q2 08)
Note:
If the UPS's NT is below that indicated in the table above, contact MGE's Office Protection Systems technical support.
The Network Management Card (66102) is not compatible with Pulsar EX 7/10, Pulsar EX 15/20/30, Pulsar ESV+,
8/11/14/22 ranges.
Network Management Cards acquire information on the operation status of the UPS systems and provide remote
control of these systems
by means of an ETHERNET network from any SNMP administration station or Web browser.
They also supply alarms to the Network Shutdown Modules to trigger shutdown or other automatic actions for
protected servers.