MGE UPS Systems 2200RT Power Supply User Manual


 
Page 8 - 3400753300/AE
4
612111098
7
1
3
2
4
12111098
7
5
3
2
1
1514
15
14
13
12
Pulsar EXB 2200/3200 RT
Pulsar EX 3200RT
Pulsar EX 2200RT
11
10
8
9
7
6
5
4
3
2
1
Slot for communication-card option.
RS232 communication port.
USB communication port.
Upper two receptacles for connection
to AC-power source.
Lower two programmable receptacles
(1 and 2).
Output circuit breakers. (EX 3200RT)
Input/Output power cords for direct
connection of protected equipment.
EX 2200RT-L5-20P/L5-20R; and
EX 3200RT-L5-30P/L5-30R.
Connector for an additional battery
module.
Connector for automatic detection of an
additional battery module.
Pushbutton to test phase/neutral
inversion of AC-power source.
LED indicating Site Wiring Alarm
Enable, with flashing and intermittent
buzzer. Reset fault with rear panel
button.
Connector for remote power off (RPO).
Battery module connectors (to the UPS
or to other battery modules).
Connectors for automatic detection of
additional battery modules.
Circuit breaker for battery ON/OFF and
protection.
1.2 Rear panel
1. Presentation
L5-20P Plug
L5-20R Receptacle
INPUT CABLE
OUTPUT CABLE
L5-30P (Plug)
L5-30R (Receptacle)
INPUT CABLE
OUTPUT CABLE
5
13
13