Filter
Top Products
Microboards CopyWriter Live
13
Auto Track Index
This feature allows you to have the Copywriter Live automatically create tracks based on
the time period you select.
Press Yes/Setup button when the Setup menu display reads AUTO Trk INDEX. The
first selection is No, which will not create tracks automatically. The choices which will
allow auto tracking are 3 minutes, 5 minutes, 7 minutes, and 10 minutes. Press No until
the correct interval appears, then press Yes/Setup to select that interval.
You can still manually index tracks even with the Auto Track Index feature turned on by
pressing the Record button. The next auto track will be the length you have specified in
the Auto Track Index.
Note that the gap between tracks will be set based on the Gap Size setting (see below).
Gap Size
The length of silence in between audio tracks can be set by changing the Gap Size value.
The Gap Size value ranges from 001 to 150. At 150, the gap is 2 seconds. At 001 the
gap is approximately 1/75 of a second. The default value is 001.
Use the Vol Up and Vol Down buttons to change the Gap size.
Setup Exit?
Press Yes/Setup to leave the Setup menu, or No to cycle through the options again.
Troubleshooting
Playback is not appearing on the screen.
Confirm the RCA connections are correct.
No Audio playback
Confirm the RCA connections are correct.
Check the playback volume and make sure it is not too low.
Disc will not play back on other player
Confirm the recorded disc is Closed.
Check compatibility of player (Supports CD Recordable media).
Playback volume too high or too low on burned CD.
Check input volume. Default settings for Input 1 and Input 2 are 22. Default
settings for MIC and XLR are 25. Check this number in the setup menu and
adjust accordingly.