Filter
Top Products
RAIDBank4 Owner’s Manual
42
5.3.4 Event Notification Configuration
This table allows the administrator to specify the level of notification provided by the
RAIDBank4. Check the radio button next to the desired notification leve. The available choices
are:
Notification Level Description
Disable Event Notification No Event Notification Will Be Sent
Urgent Error Notification Send Only Urgent Event
Serious Error Notification Send Urgent And Serious Event
Warning Error Notification Send Urgent, Serious And Warning Event
Information Notification Send All Event
5.3.5 Notification for No Event
Check the box next to “Notification for no event” to receive periodic emails when no event
occurs. This option is beneficial for remote assurance of continuous proper operation.
5.4 SNMP Configuration
The RAIDBank4 supports Simple Network Management
Protocol (SNMP) agent for monitoring by an SNMP-based
management application (also known as an SNMP manager)
can monitor the disk array. If you are already running an
SNMP management application at your site, it can monitor
the RAIDBank4. Consult your SNMP management software
documentation before entering the relevant information
into the fields. When all desired options are entered, check
the box labelled “Confirm the operation” and Click the
Button to finalize or to revert all options to default.
5.5 NTP (Network Time Protocol) Configuration
The RAIDBank4 can synchronize its internal clock to an
outside Network Time (NTP) server. This option allows
for configuration of the NTP service. To obtain an NTP
server, check with your network administrator or for a list
ofpublicserversrefertotheNTPPublicServicesProject
at http://ntp.isc.org. Enter the NTP server IP addresses
and select your time zone. When all desired options are
entered, check the box labelled “Confirm the operation”
and Click the Button to finalize or to revert all
options to default.
5.6 View Events/Mute Beeper
Use this entry to view events. If the buzzer is active, you may temporarily mute it using this option.
4-RAID Control-Web Interface