Filter
Top Products
23
Figure 24.
System Setting
The System Setting includes the System name, Location name, Login Timeout, IP
Address, Subnet Mask and Gateway. Through the Web Management Utility, you can
easily recognize the device by using the System Name and the Location Name.
The Login Timeout is to set the idle time-out for security issue, when there is no action
when running the Web Smart Utility and the time is up, you must re-login to Web Smart
Utility before you set the Utility.
Fill up the IP Address, Subnet Mask and Gateway for the device.
Figure 25.
Trap Setting
The Trap Setting enables the device to monitor the Trap through the Web Management
Utility, set the Trap IP Address of the manager where the trap to be sent.