Filter
Top Products
4-5
The BIOS Setup Utility
Video Card
This sets the type of monitor required for your computer. The display periph-
eral supports VGA/EGA, CGA80, CGA40, Monochrome (MONO), or no
monitor at all. Use the <+/-> keys to toggle between the options.
Keyboard
If the keyboard category is set to INSTALLED, the computer will test the
keyboard during boot. If set for NOT INSTALLED, the system will ignore
any keyboard errors and always attempt to boot. Set this for INSTALLED
unless using the system board in an application which does not require a
keyboard.
Setting the CMOS Extended Screen
You can toggle between the Main screen and the Extended screen (Figure 4-3)
using the PgUp and PgDn key.
Figure 4-3 CMOS Extended Screen
Serial Port A
Serial Port 1 may be set for COM1 (default), COM3, or may be disabled. Be
sure this setting does not conflict with any other peripherals.