Filter
Top Products
124
Event Configuration
You can select the system log events and SMTP events. When selected events occur, the
system will send out the log information. Also, per port log and SMTP events can be
selected. After configure, Click
Apply
.
System event selection: 4 selections – Device cold start, Power status, SNMP
Authentication Failure, and Super ring topology change. Mark the checkbox to select
the event. When selected events occur, the system will produce the logs.
Device cold start: when the device executes cold start action, the system will
produce a log event.
Device warm start: when the device executes warm start, the system will
produce a log event.
Authentication Failure: when the SNMP authentication fails, the system will
produce a log event.
Super Ring topology change: when the Super ring topology has changed, the
system will produce a log event.