Filter
Top Products
34
[quietperiod value]
Or
no 8021x misc
quietperiod
configuration mode
global configuration command to
specify the quiet period value of the
switch.
Use the no form of this command to
return to the default interval.
misc quietperiod 10
8021x misc txperiod
[TXPeriod value]
Or
no 8021x txperiod
Global
configuration mode
Use the 802.1x misc TX period
global configuration command to
set the TX period.
Use the no form of this command
to return to the default value.
Switch (config)# 8021x
misc txperiod 5
8021x misc supptimeout
[SEC]
Or
no 8021x supptimeout
Global
configuration mode
Set the period of time the switch
wait for a supplicant response to
an EAP request.
Switch(config)# 8021x
misc supptimeout 30
8021x misc
servertimeout [SEC]
Or
no 8021x servertimeout
Global
configuration mode
Set the period of time the switch
wait for a server response to an
authentication request.
Switch(config)# 8021x
misc servertimeout 50
8021x misc maxrequest
[Number]
Or
no 8021x maxrequest
Global
configuration mode
Set the number of authentication
that must time-out before
authentication fails and the
authentication session ends.
Switch(config)# 8021x
misc maxrequest 2
8021x misc
reauthperiod [SEC]
Or
no 8021x reauthperiod
Global
configuration mode
Set the period of time after which
clients connected must be
re-authenticated..
Switch(config)# 8021x
misc reauthperiod 20
8021x prostate [reject |
accept | authorize |
disable]
Interface
configuration
mode
Use the 802.1x port state interface
configuration command to set the
state of the selected port.
Reject: the specified port is
required to be held in the
unauthorized state.
Accept: the specified port is
required to be held in the
Authorized state.
Authorized:
the specified port is
Switch (config)# interface
fastethernet 0/3
Switch (config-if)# 8021x
portstate accept