Filter
Top Products
User Guide
- 16 -
Call Me Back
CALL ME BACK allows you to request a call back after reaching a busy extension or busy external
line. The system monitors the extension or line and calls you when it’s free.
To request a callback when you reach a busy or unanswered telephone:
1. Wait until you hear a busy signal when making a call.
2. Press the CALL ME BACK key.
To answer a callback:
1. Lift the handset.
Camp-On
CAMP-ON, or CALL WAITING, lets you notify someone who is using a telephone that you are
waiting to be connected. An attendant may also camp a call onto a busy station. Upon hearing the
CAMP-ON tone, the busy party can either respond or finish the current call.
To CAMP-ON to a busy station:
• Press the programmable key assigned to the CAMP-ON feature when you hear the busy signal.
To retrieve a call when you hear a CAMP-ON tone:
• Press the programmable key assigned to the CAMP-ON feature.
Cancel
The Cancel key is a fixed-function key that allows you to cancel the current operation and return to a
dial tone. Pressing this key is equivalent to replacing your handset and lifting it up again. When this
key is pressed during programming, you are returned to the previous programming step.
Pressing the Cancel key will reconnect the user to the original active call if the user is in the middle of
a Transfer.
Line Keys
The top-left programmable function key on your set will automatically be programmed as a LINE key
(referred to as either an ’intercom’ or ’Prime Line’ key). Additional programmable keys can be set up
to access other lines so that you can answer or make calls on multiple lines.
Programmable keys designated as LINE keys will indicate the status of a line with the key light as
follows:
Key Status Explanation
Lit The line is in use.
Unlit The line is idle (or free).
Flashing with ringing cadence An external call is ringing on this line.
Flashing with held cadence A call on this line is currently on hold.