Filter
Top Products
3.2.2 Configuration
Basic tab
The Basic tab provides general
information on network types and
other configurations.
Network Type. Select the type of
network that you wish to use. Select
Infrastructure mode to establish a
connection with an access point (AP).
In this mode, your system can access
wireless LAN and wired LAN
(Ethernet) via the AP. Select the
Ad-Hoc mode to communicate
directly with other mobile clients within the Wireless LAN adaptor range.
Network Name - Displays the network SSID. The network SSID is a string
used to identify a wireless LAN. Assign different SSIDs to segment the
wireless LAN and increase network security. Set the SSID to a null string
to allow your station to connect to any available access point. A Null string
may not be used in Ad-hoc mode.
Channel. In Infrastructure mode, the wireless USB adaptor automatically
tunes in to the access point channel. In Ad-hoc mode, select a channel
that is allowed for use in your country/region.
Data Rate. Sets the data transmission rate to Fix or Auto. Select Fully Auto to
allow the device to adjust to the most suitable connection. You may also fix
data transfer rates to 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2 and 1 Mbps.
PS Mode. This field allows control of the Wireless USB adaptor power
saving features. The CAM (Constantly Awake mode) is recommended for
systems running on AC power. Other options include MAX_PSP
(Maximum power savings) and Fast_PSP (Fast power-saving mode)
Others. Click the WEP or Advanced link to open the Encryption or
Advanced property tab sheet.
Operating the device at very high data rates reduces the operating
range.
3-7
Diamond Digital A101 Wireless USB Adaptor