Filter
Top Products
30 A111 Wireless Card Adaptor
Chapter 3 - Reference
Chapter 3
Software Reference
Ad Hoc
The A111 card adaptor when set to Ad Hoc mode can connect to other
wireless device(s) in a wireless network called an Ad Hoc network. To
connect the A111 card to another wireless device:
1. Launch the Wireless Settings util-
ity by double-clicking the Con-
trol Center icon in the Windows
®
taskbar.
2. Click the Survey button to scan
available wireless device(s) within
the A111 card’s range. Select
the the wireless device you
wish to connect.
3. Click the Config button to con-
figure the device settings. Set the
Network type to Ad Hoc, then
enter the Network Name (SSID)
and Channel of wireless device
you wish to connect. Click
Apply when done.
4. Click the Encryption tab if your
selected wireless device has an
enabled WEP encryption.
Obtain the WEP encryption
keys from the network
administrator, then enter them
in the Key 1 ~ 4 fields. Click
Apply when finished.
IMPORTANT! The encryption settings of the A111 card and the wireless
device must be identical to establish a connection.