Mitsubishi Electronics A111 Network Card User Manual


 
8 A111 Wireless Card Adaptor
Chapter 2 - Installation
Chapter 2
Quick Start
Soft AP (Windows XP Only)
Soft AP mode allows the A111 card to act as a virtual access point. The
computer needs to be connected to a wired network using an Ethernet connection
in order to provide network access to WLAN clients.
1. Select Soft AP Mode
3. Enable ICS* and Firewall if desired. Refer to
Windows help for information on “Internet
Connection Sharing”.
2. Drag and drop a wired network connection
next to the globe icon.
4. You can easily switch between Soft AP and
Station mode by right clicking the taskbar
icon and selecting A-S Change Mode.
*ICS is used to share this computer’s Internet connection with the rest of the computers on your
network. When this computer is connected to the Internet, communication to and from the Inter-
net to all the computers on your network are sent through this computer, called the host com-
puter. Other computers can send and receive email and access the Web as if it were connected
directly to the Internet.