EN-24
How to set the menus:
The following describes how to set AUTO POWER OFF
time as an example.
1. Press the MENU button.
• When no signal is applied, the menu would not
appear.
2. Press the
or
button to select a menu to use.
3. Press the ENTER button (or
button).
CONTRAST
IMAGE
0
BRIGHTNESS 0
0
COLOR
ON
0
SVGA60
TINT
0
SHARPNESS
COLOR TEMP.
WHITE ENHANCE
opt.
AUTO
GAMMA MODE
AV MEMORY 1
6500K
IMAGE
REVERSE
OFF
AUTO POWER
ON
OFF
AUTO POWER
OFF
SCREEN SIZE
ON
INSTALLATION
ON
BACK COLOR
OFF
TEST PATTERN
CROSS HATCH
BLUE
SVGA60
SPLASH
SCREEN
WXGA (FULL)
VERTICAL LOCATION
0
opt.
STANDARDLAMP MODE
AV MEMORY 1
IMAGE
REVERSE
OFF
OFF
BACK COLOR
OFF
TEST PATTERN
CROSS HATCH
SVGA60
LAMP TIME
(LOW)
1000H
opt.
STANDARDLAMP MODE
AV MEMORY 1
AUTO POWER
ON
AUTO POWER
OFF
INSTALLATION
TRIGGER OUT
OFF
ON
ON
BLUE
SPLASH
SCREEN
4. Press the
or
button to select an item to ad-
just.
5. Set the selected item by pressing the
or
but-
ton.
To cancel the menu:
6. Press the MENU button several times.
Important:
• When the MENU button doesn’t function, unplug
the power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with , press the
ENTER button.
IMAGE
REVERSE
OFF
AUTO POWER
ON
OFF
AUTO POWER
OFF
SCREEN SIZE
ON
INSTALLATION
ON
BACK COLOR
OFF
TEST PATTERN
CROSS HATCH
BLUE
SVGA60
SPLASH
SCREEN
WXGA (FULL)
VERTICAL LOCATION
0
opt.
STANDARDLAMP MODE
AV MEMORY 1
IMAGE
REVERSE
30 min
AUTO POWER
ON
OFF
AUTO POWER
OFF
SCREEN SIZE
ON
INSTALLATION
ON
BACK COLOR
OFF
TEST PATTERN
CROSS HATCH
BLUE
SVGA60
SPLASH
SCREEN
WXGA (FULL)
VERTICAL LOCATION
0
opt.
STANDARDLAMP MODE
AV MEMORY 1
CONTRAST
IMAGE
0
BRIGHTNESS 0
0
COLOR
0
USER
0
SVGA60
TINT
0
SHARPNESS
COLOR TEMP.
BrilliantColor
TM
opt.
AUTO
GAMMA MODE
AV MEMORY 1
SCREEN SIZE
720P(16:9)
VERTICAL
LOCATION
0
IMAGE
REVERSE
OFF
OFF
BACK COLOR
OFF
TEST PATTERN
CROSS HATCH
SVGA60
LAMP TIME
(LOW)
1000H
opt.
STANDARDLAMP MODE
AV MEMORY 1
AUTO POWER
ON
4x
CW SPEED
AUTO POWER
OFF
INSTALLATION
TRIGGER OUT
OFF
ON
ON
BLUE
SPLASH
SCREEN
FEATURE
AUTO
SVGA60
AUTO
AUTO
opt.
MENU POSITION
CINEMA MODE
VIDEO SIGNAL
?
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OFF
AUTO
OK
DISPLAY INPUT
PASSWORD
FUNCTION
1.
AV MEMORY 1
SET UP
AUTO
WXGA
SCART INPUT
WXGA
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu 2. INSTALLATION menu 3. FEATURE menu
1. IMAGE menu
ITEM SETTING FUNCTION
GAMMA MODE AUTO The proper gamma mode is automatically selected depending on the input
signal. Default is AUTO.
SPORTS This is a bright mode suitable for watching sports images.
VIDEO This is a standard mode suitable for watching video images, etc.
CINEMA This is a mode for watching movies in dim lighting as in a theater.
USER1 / USER2 Select to adjust the gamma curve. (See page 29.)
CONTRAST
±
30 Use to adjust the contrast of the projected image. (See page 28.)
BRIGHTNESS
±
30 Use to adjust the brightness of the projected image. (See page 28.)
COLOR TEMP.
5 options Use to adjust the color temperature. (See page 29.)
COLOR
±
10 Use to adjust the color thickness of the projected image. (See page 28.)
TINT
±
10 Use to adjust the color tint of the projected image. (See page 28.)
SHARPNESS
±
5 Use to adjust the sharpness of the projected image. (See page 28.)
BrilliantColor™ 0 - 2 Use to adjust the BrilliantColor™
function.
SCREEN SIZE 4 options Select according to the screen size.
VERTICAL LOCATION
±26 Use to adjust the position (height) of the projected image.
• BrilliantColor™ uses BrilliantColor™ technology of Texas Instruments in USA. When you set this item to other than
0, the projector displays higher resolution images while reproducing superior colors.
• By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal. (See
page 27.)
• When the output from HDMI device is set to RGB, COLOR cannot be adjusted.
Menu operation (continued)