Filter
Top Products
EN-26
3. FEATURE menu
ITEM SETTING FUNCTION
ASPECT AUTO Select to change the aspect ratio automatically depending on the input signal.
4:3 Select to project images with an aspect ratio of 4:3.
16:9 Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
ZOOM1 Select to enlarge and project images of CinemaScope size.
ZOOM2 Select to enlarge and project images of Vista size.
STRETCH Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.
(Non-linearly stretched.)
REAL Select to project images in their original size as input. Not available when the
keystone adjustment is applied.
PASSWORD FUNCTION
Use to enable or cancel the password lock. See page 31 for details.
MENU POSITION
2 options Use to change the position of the menu.
CINEMA MODE
AUTO
The film mode will be automatically activated when a film source signal is input.
OFF The film mode will not be activated.
VIDEO SIGNAL 8
options
When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn’t displayed correctly, select the
desired video format manually.
WXGA AUTO Use to detect WXGA signal automatically.
1280 x 768 etc. If WXGA signal isn’t displayed correctly when AUTO is selected, select the
appropriate display size depending on the type of input signal.
OFF When a signal other than WXGA is input, it may take abnormally long time to
display an image, or an image may not be displayed correctly. In such cases,
select OFF.
SET UP AUTO Select AUTO for normal use. When LANGUAGE is not set to and 480i,
480p or TV60 signal is input, the SET UP changes to 7.5% automatically.
OFF Select to make black lighter.
3.75% / 7.5% Select to make black intense.
• When 7.5% is chosen, the brightness is decreased by the set-up cancel
function for the U.S. Choose OFF when the image is dark.
SCART INPUT ON / OFF Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER IN/COMPONENT VIDEO IN terminal.)
LANGUAGE 10 languages Use to select the language used in the menus.
RESET ALL OK Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
• When WXGA in the FEATURE menu is set to other than OFF, it takes a little while to display images of WXGA and
XGA60 signals.
•
Even if WXGA is set to AUTO, some images of WXGA signal may not be displayed correctly. See page 37 for details.
• When WXGA is set to other than AUTO and OFF, TRACKING isn’t adjusted automatically. When wide strips ap-
pear, adjust TRACKING in the SIGNAL menu. (See page 30.)
• When SCART INPUT is set to ON, normal computer signals aren’t projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren’t compatible with this projector.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
Menu operation (continued)