Filter
Top Products
EN-25
ENGLISH
2. INSTALLATION menu
ITEM SETTING FUNCTION
LAMP MODE STANDARD Select this option when you want to view images in a well-lit room.
LOW Select to moderate the intensity of the lamp. The fan operating sound is reduced
and the lamp lifetime becomes longer.
LAMP TIME (LOW)
****H
This item shows a lamp operating time (hour) when LAMP MODE is LOW.
• When the LAMP MODE is STANDARD, this item shows a longer lamp operat-
ing time than the actual time. (See page 33 for the interval of lamp replace-
ment.)
CW SPEED 4x / 5x Use to change the rotation speed of the color wheel. Select 4x for normal use.
See page 30.
AUTO POWER ON
ON / OFF When ON is chosen, the lamp is automatically lit when the power cord is plugged
in the wall outlet. Choose ON when using the projector mounted on the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the remote
control to turn on the lamp.
AUTO POWER OFF OFF / 5 - 60min
Use to set the time elapsed before the projector enters the stand-by mode when
there is no signal input from the source.
SPLASH SCREEN
ON / OFF Choose ON to display the splash screen when the power is turned on.
BACK COLOR
BLUE / BLACK
Use to change the color of the screen that appears when no signal is supplied.
IMAGE REVERSE
OFF Select when viewing images from the front with the projector installed on the
floor.
MIRROR Select when viewing images projected from the behind of the screen with the
projector installed on the floor.
INVERT Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
MIRROR INVERT Select when viewing images from the front with the projector installed on the
ceiling.
TRIGGER OUT ON / OFF Choose ON to output the trigger output signal (12 V) from the TRIGGER terminal
when the lamp illuminates.
TEST PATTERN CROSS HATCH Select to show the test cross hatch pattern.
WHITE Select to show the maximum brightness image.
BLACK Select to show the minimum brightness image.
•
When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after turn-on.
• When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.
• Do not change the setting of LAMP MODE frequently.
• To cancel the test pattern, press any button.