Mitsubishi Electronics HD 4000 Projector User Manual


 
EN-38
Specifi cations
The specifi cations and outside appearance of the projector are subject to change without prior notice.
Type
Model
Display Technology
Projection lens
Light-source lamp
Image size (Projection distance)
Maximum
resolution
Computer signal
Video signal
Component
signal
Computer input
Video input
Control terminal/
Others
S-video input
Video input
Component video
input
Analog input
Digital input (HDMI)
DLP™ projector
HD4000
0.65-inch Single chip DMD (Aspect ratio 15:9)
Pixel 1280 x 768 = 983040 pixels
F 2.4 - 2.6 f= 23 - 27.6 mm
250 W
40" min. to 275" max. (Projection distance 1.3 to 10 m)
Maximum resolution : 1280 x 1024 dots (Analog) / compressed
Panel resolution : 1280 x 768 dots
NTSC / PAL / SECAM / NTSC 4.43 / PAL-M / PAL-N / PAL-60
480i, 480p, 576i, 576p, 720p, 1080i
Panel resolution : 1280 x 768 dots
[Signal type] [Terminal type] [Line]
Analog RGB D-SUB 15P 1
HDMI HDMI 19P 1
[Signal type] [Terminal type] [Line]
Video input RCA 1
S-Video input S 1
Component video input
RCA 1
RS-232C (8-pin)
DC 12 V, Max.200 mA (Stereo mini jack)
+41°F (+5°C) to +95°F (+35°C)
AC100 - 240 V, 50/60 Hz
3.5 A
310 mm (W) x 100 mm (H) x 245 mm (D) * Not included protrusion.
2.9 kg
Luminance signal : Vp-p=1.0 V 75 Ω (negative sync)
Chrominance signals : Vp-p=0.286 V 75 Ω (burst signal)
Vp-p=1.0 V 75 Ω (negative sync)
YC
B
C
R
: Vp-p=1.0 V 75Ω (Y) (negative sync)
Vp-p=0.7 V 75 Ω (C
B
, C
R
)
RGB : Vp-p=0.7 V 75 Ω (negative sync)
YC
B
C
R
:
Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
B
, C
R
)
HD/CS : TTL-level
(negative or positive polarity)
VD : TTL-level
(negative or positive polarity)
HDMI interface (TMDS single link)
61
245
310
1005
HDMI IN
USBSERIAL
TRIGGER
COMPONENT VIDEO IN
S-VIDEO IN
VIDEO IN
Dimension Drawings (unit : mm)
SERIAL
TRIGGER
Operating temperatures
Rated voltage
Power consumption
Dimensions
Weight
Others