Mitsubishi Electronics LVP-X300U Projector User Manual


 
EN 10
Basic connections
This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com-
puters having analog RGB output.
Important:
Make sure that your equipment is turned off before connection.
Plug in firmly and unplug by holding the plug, not by pulling the main power cable.
If connected units are set too close to one another, the image may be affected.
Refer to the owner's guide of each component for details of connections.
Projector + AV equipment
Important:
Match the color of video and audio plugs on the AV cable with the connections.
S-video signals take priority over video signals. If you input both S-video signals and normal video signals at
the same time, the normal video input automatically is inhibited.
to audio
output
to video
output
to S-video
output
to audio
output
to video
output
Connect either one of these.
Connect
either one
of these.
DVD player, others
to audio input 2
to S-video
input 2
to S-video
output
to S-video
input 2
to video input 2
to audio input 1
to video
input 1
VCR, others
to COMPUTER
1 IN
BG R
HD/CS
VD
DVD player or HDTV decoder
No connection
C
B
(P
B
)Y C
R
(P
R
)
BNC - RCA connector
(optional)
Projector + DVD player or HDTV decoder
Some DVD players have output terminal for 3 line fitting (Y, CB, CR). When connecting them to the projector,
connect to COMPUTER 1 IN or COMPUTER 2 IN of the projector. In this case, set Y, CB, CR for COMPUTER
INPUT setting in SIGNAL menu.
Connecting with DVD player
DVD player generally has SDTV system compo-
nent video output (Y, CB, CR) terminal. When con-
necting the projector with DVD player, the COM-
PUTER INPUT in the SIGNAL setting menu be-
comes [Y, CB, CR] automatically.
Connecting with HDTV decoder
Many HDTV decoders have HDTV system compo-
nent video output (Y, PB, PR) terminal. When con-
necting the projector with this type of HDTV de-
coder, the COMPUTER INPUT in the SIGNAL
setting menu becomes [Y, PB, PR] automatically.
Y, P B, PR is an example of the terminal names for a HDTV decoder.
The terminal name is different depending on the connected equipment.
Use mini D-SUB 15 pin-BNC conversion cable for connection.
Some DVD players may not project the image correctly.
When connecting with HDTV equipment which has R, G, B output, set RGB for the COMPUTER INPUT in the SIGNAL
setting menu.