Filter
Top Products
APPENDIX
AP – 5
7) Reading command diagram
Monitor projector operation status. The power ON, OFF and input terminal settings can be monitored.
ASCII HEX
Function Data (Receive) Function Data (Receive)
POWER ON vP 1 76h 50h 31h
POWER OFF vP 0 76h 50h 30h
INPUT COMPUTER 1 vI r1 76h 49h 72h 31h
INPUT COMPUTER 2 vI r2 76h 49h 72h 32h
INPUT VIDEO 1 vI v1 76h 49h 76h 31h
INPUT VIDEO 2 vI v2 76h 49h 76h 32h
Sending commands Status code from Meaning
from the PC etc. projector
30 30 76 49 OD Command to confirm input
'0' '0' 'v' 'I' ' '
30 30 76 49 76 31 0D Command (Input is Video 1)
'0' '0' 'v' 'I' 'v' '1' ' ' carrired out
When a personal computer sends the command, data code will not be attached. On the other hand, the projector
which has received a command will attach the recent operating status and then send.
[Example ] Input was Video 1 when the operating status of the input terminal was confirmed.
8) Menu setting commands
The menu setting commands execute the menu setting of this projector. If the personal computer doesn’t send
the commands without attaching the data code, the projector which has received the command replays the
setting data as data code.
ITEM ASCII HEX VALUE
CONTRAST P 50h ±30±30±30 (R from G+Main data+B from G)
BRIGHTNESS Q 51h ±30±30±30 (R from G+Main data+B from G)
COLOR TEMP. A 41h 1 (Standard), 2 (High), 3 (Low), 4 (User)
SHARPNESS(COMPUTER input)
R1 52h 31h ±2
SHARPNESS(VIDEO input)
R2 52h 32h ±10
TINT S 53h ±10
COLOR T 54h ±10
BASS AUB 41h 55h 42h 0 - 3
TREBLE AUT 41h 55h 54h 0 - 3
PinP AUDIO AUP 741h 55h 50h 0 (Main), 1 (Sub)
IMAGE REVERSE IR 49h 52h 0 (Off), 1 (Mirror), 2 (Invert), 3 (Mirror invert)
KEYSTONE KS 4Bh 53h ±15
AUTO POWER ON APON 41h 50h 4Fh 4Eh 0 (ON), 1 (OFF)
AUTO POWER OFF APOF 41h 50h 4Fh 46h 00 (Off) , 05, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60
TEST SIGNAL TS 54h 53h 0 (ON), 1 (OFF)
MENU POSITION MP 4Dh 50h 0 (Upper left), 1 (Lower right)
MODE DISPLAY MD 4Dh 44h 0 (ON), 1 (OFF)
SPLASH SCREEN SS 53h 53h 0 (ON), 1 (OFF)
CINEMA MODE CM 43h 4Dh 0 (AUTO), 1 (OFF)
VIDEO SIGNAL VS 56h 53h 0 (AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM) ,
4 (4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)
LANGUAGE LG 4Ch 47h 0 (
), 1 (English), 2 (Español), 3 (Deutsch) ,
4 (Frençais), 5 (Italiano), 6 ( )
HORIZ. POSITION HP 48h 50h + (increase), – (decrease)
VERT. POSITION VP 56h 50h + (increase), – (decrease)
FINE SYNC. FN 46h 4Eh 00 - 31
TRACKING TRK 54h 52h 4Bh + (increase), – (decrease)
COMPUTER INPUT CIN 67h 49h 4Eh 0 (RGB), 1 (YCBCR), 2 (YPBPR)
HOLD BEGIN HLB 48h 4Ch 42h 00 - 15
HOLD END HLE 48h 4Ch 45h 00 - 15
CLAMP POSITION CLP 43h 4Ch 50h 000 - 255
CLAMP WIDTH CLW 43h 4Ch 57h 000 - 255
ANAMORPHIC SC 53h 43h 0 (ON), 1 (OFF)