Mitsubishi Electronics MH2850 Projector Accessories User Manual


 
EN-28
CONTRAST B 0
BRIGHTNESS R 0
CONTRAST R
COLOR TEMP.-USER
0
CONTRAST G 0
BRIGHTNESS G 0
BRIGHTNESS B 0
Adjusting projected images
To adjust the brightness (CONTRAST and BRIGHTNESS):
You can make adjustments for the brightness of the projected image using the menu.
(See page 23 for menu setting.)
1. Display the IMAGE menu.
2. Select CONTRAST or BRIGHTNESS by pressing the
S
or
T
button.
3. Adjust the selected item by pressing the
W
or
X
button.
To cancel the menu:
4. Press the MENU button.
CONTRAST
Select to adjust the contrast of the image. Every time the
X
button is pressed, the image becomes brighter and more
defi ned. Every time the
W
button is pressed, the image becomes darker and less defi ned.
BRIGHTNESS
Every time the
X
button is pressed, the image becomes brighter. Every time the
W
button is pressed, the image
becomes darker.
To adjust the color (COLOR and TINT):
You can adjust the color of the projected image using the menu.
(See page 23 for menu setting.)
1. Display the IMAGE menu.
2. Select COLOR or TINT by pressing the
S
or
T
button.
COLOR or TINT is unavailable when COMPUTER1, COMPUTER2 or DVI is selected as the input source.
TINT is available only when the NTSC signal is input.
3. Adjust the selected item by pressing the
W
or
X
button.
To cancel the menu:
4. Press the MENU button.
COLOR
Use to adjust the color thickness of the projected image. Every time the
X
button is pressed, the color becomes
thicker. Every time the
W
button is pressed, the color becomes lighter.
TINT
Use to adjust the tint of the projected image. Every time the
X
button is pressed, the image appears more greenish.
Every time the
W
button is pressed, the image appears more reddish.
To sharpen or soften the projected image (SHARPNESS):
You can adjust the sharpness of the projected image using the menu.
(See page 23 for menu setting.)
1. Display the IMAGE menu.
2. Select SHARPNESS by pressing the
S
or
T
button.
3. Adjust the selected item by pressing the
W
or
X
button.
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (COLOR TEMP.):
You can select a preset color temperature (white tone) using the menu.
(See page 23 for menu setting.)
1. Display the IMAGE menu.
2. Select COLOR TEMP. by pressing the
S
or
T
button.
3. Select your desired color temperature by pressing the
W
or
X
button.
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (To customize the color temperature):
To customize (and store) the color temperature to your preference, carry out the following procedure.
(See page 23 for menu setting.)
1. Select COLOR TEMP. in the IMAGE menu.
2. Press the
W
or
X
button to select USER
.
3. Press the ENTER button.
4. Press the
S
or
T
button to select the desired item.
5. Press the
W
or
X
button to adjust the selected item.
6. Repeat steps 4 and 5 for optimum adjustment results.