Filter
Top Products
- 1-11 -
ENGLISH
If a non-Factory Preset timing is used, "FACTORY PRESET" does not work.
X: Available
NOTE
To adjust the purity condition on the top-left corner.
To adjust the purity condition on the top-right corner.
To adjust the horizontal beam alignment on the full screen area.
CORNER PURITY(TL)
CORNER PURITY(TR)
CORNER PURITY(BL)
CORNER PURITY(BR)
MOIRE CANCEL LEVEL
CLAMP PULSE POSITION
FACTORY PRESET
HORIZ-CONVERGENCE
VERT-CONVERGENCE
FACTORY PRESET
DEGAUSS
INPUT
POWER SAVE
CONTROL LOCK
OSD POSITION
OSD TURN OFF
DIAGNOSIS
LANGUAGE
AUTO SAVE
ALL RESET
FACTORY PRESET
Group
Icon
Item
Icon
Item
To adjust the purity condition on the bottom-left corner.
To adjust the purity condition on the bottom-right corner.
To decrease the level of the moire-clear wave.
To eliminate an excessive green or white-back ground that may occur when
both Sync-On green and external sync signals are applied to the monitor.
To clamp the video signal at the
front of the H-Sync pulse.
To clamp the video signal at the back of the H-
Sync pulse. If you connect to an older
Macintosh, you may need to press plus button.
To adjust the vertical beam alignment on the full screen area.
To restore to factory preset level.
To eliminate possible color shading
or impurity due to magnetic effects.
To select the constant power
consumption mode.
To select the power-save mode.
(Your computer must be set for
power management.)
To unlock the OSD adjustments.
To adjust the time that the OSD screen disappear when no access.
To lock the OSD function except
for "BRIGHT" and "CONTRAST".
To move the OSD screen position in
a counter clockwise direction.
To move the OSD screen position in
a clockwise direction.
Indicates the current scanning frequency, factory or user preset timing
number, and signal iput connector.
Restores all items to the factory
preset level.
Press the Minus Button Press the Plus Button
To restore to factory preset level.
To restore to factory preset level.
To choose the language used on OSD.
ENG.....English, GER.....German, FRA.....French,
ESP.....Spanish, ITA ..... Italian, .....Japanese
(PURITY)
(CONVER.)
(MISC.)
"BRIGHT" and "CONTRAST" are available at the locked condition.
When selecting "OFF", if "SAVE" is not done before the OSD screen disappeared, the new
setting is invalid.
To save the new setting automatically.
To save the new setting with a
comfirmation message.
ABC
XXX
XXX
XXX
XXX
XX
X
---
XXX
XXX
---
---
XX
X
XX
XXX
---
X
X
---
---
To select the signal input connector, SIGNAL A or