Mitsubishi Electronics LVP-XD10U Projector User Manual


 
English 17
B Image Page
Select the Image sub-page and the first item, "Auto Resize" will be highlighted. There are
five items on this page: Auto Resize, H. Phase, H. Size, H. Position, and V. Position (Fig.
22).
If an AV box is attached and the input is from Video instead of PC, another different Image
sub-page including Image Ratio, System ,Color and Tint will come out as seen in Figure 23.
Figure 22 Image sub-page – Only available
when the input signal is PC
Figure 23 Image sub-page – Only available
when the input signal is from video, S-video
Setting effects
Auto Resize
When Auto Resize is on, the projector determines the best fit of the
image to the screen.
H. Phase
If flicker occurs on a projected image, users may try to adjust the H.
Phase manually.
H. Size
If the projected image is too wide or too narrow for the screen, users
may turn Auto Image off and adjust the H. Size manually to fit the
screen size.
H. Position
(move the image left) (move the image right)
The Auto Image should be turned off to activate the H. Position item.
Position adjustments are saved when the projector is power off.
V. Position
(move the image down) (move the image up)
Position adjustments are saved when the projector is power off.