Filter
Top Products
22 English
C Troubleshooting
PROBLEMS TRY THESE SOLUTIONS
NO POWER
y
Plug the power cord into the AC Inlet.
y
Plug the power cord into the power Inlet.
y
Wait two minutes after the projector has been turned off
before turning the projector back on.
NO PICTURE
y
Check that you have selected the proper input source.
y
Ensure all cables are connected properly.
y
Adjust the brightness and contrast.
y
Remove the lens cap.
y
Is the POWER indictor flashing?
y
Is the STATUS Indicator flashing?
IMAGE ISN’T
SQUARE ON THE
SCREEN
y
Reposition the unit to improve its angle on the screen.
y
Is the vertical offset properly corrected using the keystone
function?
POOR COLOR
y
Select the correct video system.
y
Adjust brightness, contrast, or saturation.
IMAGE IS BLURRED
y
Adjust the focus.
y
Reposition the unit to improve its screen angle.
y
Ensure the distance between the unit and screen is within
the adjustment range of the lens.
REMOTE CONTROL
DOESN’T WORK
y
Replace the batteries with new ones.
y
Make sure there is no obstacle between the remote control
and the unit.
y
Stand within 10 meters (32 feet) of the unit.
y
Make sure nothing is blocking the receiver on the control
pad.
NO SOUND
y
Check audio cable connection from audio input source.
y
Adjust audio source.
y
Press “Volume” (+) button.
y
Press “Mute” button.