Filter
Top Products
20 English
Other Correspondent Remote Functions and
Messages
OSD FUNCTION
Source
The selected source will be displayed at the
bottom right of the screen for 3 seconds after
selecting the source. (PC, VIDEO, S-VIDEO).
Freeze
The image will be frozen when the "Freeze" button
is pressed. A mark appears at the lower right of the
screen for 3 seconds during the freeze function.
Furthermore, a "
X
" mark appears at the lower right
of the screen for 3 seconds when freeze is
released. "Freeze" is released when the source
button or the "Freeze" button is pressed again.
Mute
Press the "Mute" button and the sound will be
muted. There will be an OSD message as shown
below:
Press Mute again or the volume +/- buttons to turn
off the mute.
Volume
Press volume + or - buttons to adjust the volume.
The OSD message below will appear: (The
message will disappear automatically 3 seconds
after the volume is adjusted.)
Magnify
By pressing the magnify "+" button, the center of
the picture can be magnified. Press the button
again, and the image will be further magnified (to
a maximum of 4X). Press the magnify "-" button,
and the size of the magnified image will be
reduced by 50 percent. To return to the normal
display mode, press the "Return" button.
Laser Press this button to generate the laser beam.
Disk Pad If users connect the PS2 (ADB) mouse cable on
the projector with the PC/Notebook (Macintosh/
Powerbook) mouse port, the disk pad will be able
to function as a PC/Notebook mouse. When an
image has been magnified, press the “Disk Pad”
button to move around the display area (the
mouse function is not available when magnify
function is on).
Drag This button is a toggle switch to turn on/off the drag
function of the remote mouse.
Blank Press this button to activate or release the blank
function.