Mitsubishi Electronics SD200U Projector User Manual


 
EN 11
ENGLISH
COMPUTER OUT
COMPUTER 2 / COMPONENT IN
COMPUTER 1 IN
COMPUTER
AUDIO IN
VIDEO 1
IN
VIDEO 2
IN
S-VIDEO
VIDEO
AUDIO
AC IN
AUDIO OUT
MAIN
MOUSE /RS-232C
AUDIO OUT
MONITOR OUTPUT
to COMPUTER (1or2) IN
to AUDIO IN
to monitor port
to COMPUTER
OUT
to PC audio
output
Audio cable (option)
When outputting to both a
PC monitor and the projector.
RGB cable for PC
RGB cable for PC (option)
computer
Projector + Personal computer
Important:
When you use a long RGB cable instead of the cable provided, the picture quality may deteriorate.
Connectors or analog RGB output adapters may be necessary depending on the PC connected to this projector.
Please contact your dealer.
The audio input for this projector is a stereo pin jack. (Speaker output is mono.) Please check the available
cable for the audio input terminal of the PC. Some personal computer may not have the audio output terminal.
For using Macintosh
A monitor output adapter is necessary for a Macintosh if it has no video port. Please contact your dealer.
A MAC adapter for RGB cable may be necessary depending on the personal computer connected to this projec-
tor. Please contact your dealer.
About DDC™ (For COMPUTER 1 IN connector)
The projector complies with VESA DDC 1/2B (EDID) specification. If your computer provides DDC 1/2B (EDID)
function, setup will be done automatically. If your system is Windows
®
98 or higher, your computer supported in
standard. If your system is Windows
®
95 or lower, you must down load the driver from our Internet Home Page for use
this function. Please contact your dealer or Mitsubishi sales office for more details.