Filter
Top Products
DX-VS1UE User
DX-VS1UE UserDX-VS1UE User
DX-VS1UE User’
’’
’s Manual
s Manuals Manual
s Manual
37
the subnet as both your PC and DX-VS1UE is included in.
Q. Regarding the setup program, If one of DX-VS1UE is chosen from the list box and the
Reboot button or Start Configuration button is clicked, the setup program returns a message
like “No response.”
A. If the IP address of the DX-VS1UE you selected is not included in the subnet to which
your PC belongs, the setup program returns a message like “No response”. Please set up the
IP address of DX-VS1UE again by pressing “Change IP Addr” button so that the IP address
of DX-VS1UE is included in the subnet to which your PC belongs.
Q. When changing the TCP port number of a Web server into 60000
th
from 80
th
, it became
impossible to access the homepage of DX-VS1UE. What is necessary to do?
A. Usually, a 80
th
port is the port number for transmitting and receiving data. Since this
number has been changed, it is impossible for DX-VS1UE and your browser to transmit
and receive data to each other. Please input an IP address into your browser as below and
connect with it.
http://***.***.***.***:60000/
“***.***.***.***” is the IP address of DX-VS1UE. If the homepage of DX-VS1UE is dis-
played now, please return the TCP port number of a Web server to 80
th
of origin immedi-
ately.
Q. I forgot the password of server configuration level. What is necessary to do?
A. Please consult the store where you purchased DX-VS1UE.
Q. Any operation of a digital recorder or an external camera cannot be performed.
A. Is the serial configuration set up appropriately? It is necessary to connect a digital recor-
der to RX1, TX1, and GND of the serial port#1 by the RS232C cable. Moreover, when con-
necting an external camera via RS232C, it is necessary to connect with RX2, TX2, and
GND of the serial port#2. Furthermore, please check whether communication setting of
baud rate, stop bits, data bits, parity check, etc of an external camera or a digital recorder
corresponds with that of DX-VS1UE In the case of an external camera, please check
whether the Pan/tilt/zoom configuration is also set up correctly.
Q.The “LOADING” message keeps appearing on the homepage of DX-VS1UE. Why does
this occur?
A. This message may keep appearing when DX-VS1UE starts without input video signal.
Please check the input video signal.