Filter
Top Products
EN-3
1
Copy two files (DI_4.1.3.6.msi and Setup.exe) contained in the Tools folder of CD-ROM to the hard disk of
your personal computer.
2
Double-click the file named Setup.exe.
3
When the following window appears, click Next.
Installation
Before starting installation, be sure to read “ReadMe.txt” contained in the CD-ROM.
Connection
Preparation/SetUp (continued)
Computer
To LAN terminal
LAN cable (option)
(100BASE-TX or 10BASE-T should be supported.)
LAN cable (option)
(100BASE-TX or 10BASE-T
should be supported.)
External HUB
Use a straight-through category-5 cable for LAN connection.•
Don’t touch the metal parts of the LAN connector and LAN cable because static electricity may be discharged •
from your body, causing damage to the projector.
When STANDBY MODE of the INSTALLATION menu of the projector is set to LOW, the LAN network is
disabled. To enable the LAN network, set STANDBY MODE to STANDARD. (See page 25 of User Manual
of the projector.)