Mitsubishi Electronics XD3200U Projector User Manual


  Open as PDF
of 53
 
EN-24
Volume from the speaker
PresstheVOLUME+or- button to change the volume from the speaker.
The volume control bar will appear on the screen.
VOLUME 15
• Thevolumecontrolbarwilldisappearabout10secondsaftertheVOLUMEbuttonisreleased.
• TheVOLUMEbuttonsdon’tfunctionwhilethemenuselectionbarorthemenuisbeingdisplayed.
• Whenahigh-levelaudiosignal,suchasaDVDaudiosignal,issuppliedtotheAUDIOINterminals,theoutput
from the speaker may be distorted.
• WhentheaudiocableisconnectedtotheAUDIOOUTterminal,thespeakeroutputismuted.
• ThevolumeoftheaudiofromtheAUDIOOUTterminalisalsochangedbypressingtheVOLUMEbuttons.
• ThevolumeoftheaudiofromtheAUDIOOUTterminalvarieswithintherangebetween0and31.
Setting the aspect ratio
You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the
setting according to the type of the input video signal.
How to change the settings:
With the remote control:
1. Press the ASPECT button.
• EverytimetheASPECTbuttonispressed,theaspectmodechangesfromNORMALto16:9,toFULL,and
back to NORMAL.
- NORMAL:
Select to change the aspect ratio automatically depending on the input signal. (Select this option for
normal use.)
- 16:9:
Select to expand squeezed (or horizontally compressed) images such as DVD images to 16:9.
- FULL:
Select to project images in full size (1024 x 768 pixels) irrespective of type of input signal.
With the QUICK MENU or FEATURE menu:
(See page 26 for menu setting.)
1. Display the QUICK MENU or FEATURE menu.
2. Select ASPECT by pressing the or button.
3. Select your desired aspect ratio by pressing the or button.
When 16:9 is selected with the FEATURE menu, you can make further settings
using the following procedures.
4. Press the ENTER button.
5. Select an item you want to set by pressing the or button and select a
setting by pressing the or button.
• POSITION:
You can select the image display position within the screen from UPPER,
CENTER, and LOWER.
• MODE:
You can select whether or not to display signals at 16:9 depending on
their type.
- ALL SIGNAL:
All signals are always displayed at 16:9 irrespective of their type.
- VIDEO ONLY:
Signals supplied from video devices only are displayed at 16:9.
To cancel the menu:
6. Press the MENU button.
Important:
• Whena16:9imageiskeptdisplayedforalongtimebeforedisplaying4:3image,theafterimagesoftheblackbars
may appear on the 4:3 image screen. Consult your dealer in this case.
NORMAL
ASPECT
LAMP MODE
STANDARD
QUICK MENU
CONTRAST
BRIGHTNESS
0
0
STANDARD
COLOR
0
COLOR
COLOR TEMP.
0
SHARPNESS
AUTO
COLOR
ENHANCER
SELECT
USER MENU
OK
DETAIL MENU
Viewing video images (continued)
ASPECT – 16:9
ALL SIGNAL
CENTER
POSITION
MODE
FEATURE
opt.
 previous next