Mitsubishi Electronics XD3200U Projector User Manual


  Open as PDF
of 53
 
EN-47
Troubleshooting (continued)
No image appears on the screen. (continued)
Problem Solution
“NO SIGNAL” is
displayed.
• Turnonthepoweroftheconnecteddevice,orcheckwhetherthereissomething
wrong with the connected device.
• Checkwhethertheexternaldeviceoutputsignals.(Checkthisespeciallywhenthe
external device is a notebook computer.)
• Checkthatthecableconnectedtotheexternaldeviceisn’tdefective.
• Checkthattheprojectorisconnectedtotheexternaldeviceusingthecorrectterminals.
• Checkthattheconnecteddeviceiscorrectlyselectedastheinputsource.
• Whenanextensioncordisbeingused,replaceitwiththesuppliedcableandcheck
whether images are projected correctly. If images are projected correctly, use an RGB
signal amplifier along with the extension cord.
Images are not displayed correctly.
Problem Solution
Projected images are
shaking.
Projected images are
displaced.
• Checkthatthecableconnectedtotheexternaldeviceisn’tintermittent.
• Connectthecable’splugwiththeexternaldevice’sconnectorrmly.
• Projectanimagecontainingmanycharacterssuchasahelpmenuandpressthe
AUTO POSITION button.
• Somecomputersoutputout-of-specsignalsonrareoccasion.AdjusttheSIGNAL
menu. (See pages 35 and 36.)
Projected images are
distorted.
• Adjusttheprojectorandthescreensothattheyareperpendiculartoeachother.(See
page 11.)
Projected images are
dark.
• AdjustBRIGHTNESSandCONTRASTintheQUICKMENUorIMAGEmenu.(See
page 33.)
• Replacethelamp.(Seepage43.)
Projected images are
blurred.
• Adjustthefocus.(Seepages16and22.)
• Cleanthelens.
• Pressthe or button on the remote control to eliminate flicker.
• AdjustTRACKINGandFINESYNC.intheSIGNALmenu.(Seepage36.)
• AdjustBRIGHTNESSandCONTRASTintheQUICK MENU or IMAGE menu. (See
page 33.)
• Adjusttheprojectorandthescreensothattheyareperpendiculartoeachother.(See
page 11.)
White dots are seen
on projected images.
Black dots are seen
on projected images.
• ThissymptomisnormalforaDLP™projectorandisnotamalfunction.(Averysmall
number of pixels may stay lit or out, but such symptom is not a malfunction. Pixels of
99.99%ormoreareeffective.)
Rainbow effect is seen
on projected images.
• ThisisduetocolorbreakingnoisethatoccursinaDLP™systemandisnota
malfunction.
Fine streaks are seen
on projected images.
• Thisisduetointerferencewiththescreensurfaceandisnotamalfunction.Replace
the screen or displace the focus a little.
• Verticalorhorizontalstreaknoisemayappearontheprojectedimage,dependingon
the type of the DVD player or game console you use. In such a case, you can reduce
such streak noise by enabling the LPF.
Projected images
become wavy.
• Connecttheplugsofthecablestoexternaldevicessecurely.
• Keeptheprojectorawayfromdevicesthatemitinterferingradiowaves.
• Whenthekeystoneadjustmentiscarriedout,theimagemaynotbedisplayed
correctly depending on the type of input signal. This isn’t a product malfunction. In
this case, readjust the keystone so that the amount of keystone correction is as small
as possible.
Hue is not appropriate.
• Checkthatthecablesconnectedtotheexternaldevicesarenotbroken.
Tint in projected
images is incorrect.
• CheckthatCOMPUTERINPUTintheSIGNALmenuiscorrectlyset.(Seepage32.)
• Checkthatthecableconnectedtotheexternaldeviceisn’tbroken.
 previous next