Mitsubishi Electronics XD80 Projector User Manual


 
E-16
VIDEO
S-VIDEO
Connecting Personal Computers and Video Equipment
Connections with Composite Signals
Video Equipment with VIDEO Connectors
Connect to the projector’s VIDEO connector using a commercially available video cable. Please attach the supplied ferrite core
to the video cable as described below.
The input setting of the VIDEO connector has been set to “Auto” at the factory; however, if the projector does not project, please
change the input setting to “Your Country’s Television Broadcast System” using the menu sequence of [Setup] [Input Format]
[Video].
See “Input Format” on Page E-49.
Video Equipment with S-VIDEO Connectors
Connect to the projector’s S-VIDEO connector using a commercially available S-Video cable.
The input setting of the S-VIDEO connector has been set to “Auto” at the factory; however, if the projector does not project,
please change the input setting to “Your Country’s Television Broadcast System” using the menu sequence of [Setup] [Input
format] [S-Video].
See “Input Format” on Page E-49.
Video deck, DVD player, document
camera, etc.
Video cable (RCA pin plug)
(Not supplied)
S-Video cable (Mini DIN 4-pin plug)
(Not supplied)
Ferrite core (Supplied item)
(Mount to projector side of cable)
Cable
Ferrite core
Mounting the Ferrite Core
Open the ferrite core, loop the cable through it, then close.