Filter
Top Products
E-27
The dotted lines indicate the proper condition
Keystone Manual Adjustment
Use this to adjust for trapezoidal (keystone) distortion of the pro-
jected image. The projector has both an automatic and a manual key-
stone adjustment function. The manual adjustment will be described
here.
Adjustment Method
(1) Press the (̆̄) buttons of the projector, or the (̆̄) KSTN but-
tons of the remote control and set the left and right sides so that
they are parallel.
The keystone adjustment display appears when one of the buttons is
pressed.
General Operation
RGB
STANDBY
VIDEO
FREEZE
MUTE
LAMP MODE AUTO
ASPECT
TIMER
VOL ZOOM
QUICK
MENU
ENTER
Q
1234
KSTN
CANCEL
(1)
(2)
Press the ̄ button. Press the ̆ button.
SOURCE
AUTO
(Projector button)
(2) To exit the display immediately, press the CANCEL button of the
remote control.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Screen examples have been drawn in an exaggerated style for the purpose of description.
* Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion
completely.
* When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off.
* See “Adjustment of the Projection Screen” on Page E-22 for information about the Auto Keystone function.
See “Auto Keystone” on Page E-46 for information about turning Auto Keystone ON and OFF.
Also see “Keystone” on Page E-46 for information about making manual adjustments using the on-screen menu.
Adjustment of the Volume
This function adjusts the volume of the built-in speaker.
(1) Press the ̆ or ̄ VOL button to adjust the volume.
The volume adjustment display appears when one of the buttons is
pressed.
The ̆ button increases the volume and the ̄ button decreases the
volume.
RGB
STANDBY
VIDEO
FREEZE
MUTE
LAMP MODE AUTO
ASPECT
TIMER
KSTN ZOOM
QUICK
MENU
ENTER
Q
1234
VOL
CANCEL
(1)
(2)
(2) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Adjustment of the volume will not produce any sound unless an image is
being projected.
(1)