Mitsubishi Electronics XD80 Projector User Manual


 
E-46
Vertical Flip / Horizontal Flip
In selecting the method of projecting to the screen, these functions are
set when the projector is in a rear screen installation.
Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting
contents with the SELECT (̇̈) buttons.
View
Vertical Flip Off
Horizontal Flip Off
Vertical Flip Off
Horizontal Flip On
Vertical Flip On
Horizontal Flip On
Vertical Flip On
Horizontal Flip Off
XD80
XD80
XD80
XD80
Keystone
Keystone distortion will occur when the projector and screen are on an
angle (in the vertical orientation). The Keystone function is used to manu-
ally adjust this distortion.
Select the item name “Keystone” and correct the keystone distortion using the
SELECT (̇̈) buttons.
Press the ̇ button. Press the ̈ button.
Note:
* The menus and other on-screen displays cannot be adjusted.
* Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion
completely.
* When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off.
* See Adjustment of the Projection Screen on Page E-22 for information about the Auto Keystone function.
See Keystone Manual Adjustment on Page E-27 for information about manual adjustment using the projector and the remote control.
Auto Keystone
Auto Keystone is set to provide an automatic adjustment of the key-
stone distortion.
Select the item name “Auto Keystone” and set with the SELECT (̇̈) buttons.
On............... provides automatic adjustment.
Off .............. does not provide automatic adjustment.
Note:
See Adjustment of the Projection Screen on Page E-22 for information about the Auto Keystone function.
See Manual Adjustment of Keystone and the aforementioned Keystone on Page E-27 for information about manual adjustment using the
buttons of the projector and the remote control.