Mitsubishi Electronics XD90U Projector User Manual


 
EN-35
ENGLISH
4. Advance menu
Function
(default setting/
value)
Description
Mirror (Floor
front)
The projector can be installed behind a screen. In such case, you can use
this function to set the correct orientation of the projected image. Refer
to "Choosing a location" on page 13 for more information.
Blank Time
(20)
Sets the image blank time when the Blank feature is activated, once
elapsed, the image will return to the screen.
Source Scan
(On)
Sets whether the projector searches automatically for input signals. If the
source scan is On, the projector will scan for input signals until it
acquires a signal. If the function is not activated, the projector selects the
last used input signal.
Language
(English)
Language sets the language for the OSD control menus. The available
languages are: English, French, German, Spanish, Italian, Russian,
Swedish, Dutch, Polish, Czech, Simplified Chinese, Traditional Chinese,
Japanese, Korean, Thai, Portuguese and Turkish.
Use the Keystone /3Left or Keystone /4Right buttons on
the projector, or the 3Left or4Right buttons on the remote control to
select your desired language.
Splash Screen
(XD90U logo)
Allows you to select which logo screen will display during projector
start-up. Three modes are available: Default, black screen or blue screen.
High Altitude
Mode (Off)
A mode for operations in areas like high altitude or high temperature.
We recommend you use the High Altitude Mode when your environment
is higher than 3000 feet above sea level, or is hotter than 40
°C.
To activate the High Altitude Mode, select On by pressing Left 3/
Right 4on the projector or remote control. A confirmation message dis-
plays. Press AUTO.
Next time you turn on the projector, it will show a message pictured
below as a reminder during the start-up.
Operation under "High Altitude Mode" may cause a higher decibel
operating noise level because of increased fan speed necessary to
improve overall system cooling and performance.
Current Status
High Altitude Mode On
This mode is used for protecting projector from extreme environment and may cause
high fan speed.