Mitsubishi Electronics XL2550U Projector User Manual


 
EN-27
5. INFORMATION menu
ITEM DESCRIPTION
LAMP TIME (LOW) This item shows a lamp operating time (hour) calculated based on that LAMP MODE is LOW.
When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than
the actual time. (See page 38 for the interval of lamp replacement.)
When the lamp operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time
exceeding 10 hours is indicated by the actual hours.
When the lamp operation time exceeds the time elapsed until the lamp shutdown notice
is issued, the bar turns to yellow. When the lamp operation time exceeds the time elapsed
until the lamp shutdown warning is issued, the bar turns to red. (See page 38.)
INPUT Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FREQUENCY Indicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE Indicates the type of the sync signal for the currently projected video signal.
INFORMATION
opt.
LAMP TIME (LOW)
INPUT
RESOLUTION
VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
SYNC. TYPE 5wire
60.02 KHz
75.04 Hz
1024x768
COMPUTER2
0 H
RG
HV
B
Menu operation (continued)