Filter
Top Products
Getting Started 1-3
Connecting the Printer’s Power Supply
Do not touch the electrical connectors while setting
up the printer. Electrostatic discharge can damage or
destroy the printhead or electronic components.
To connect the power supply to the printer:
1. Place the printer on a table in a location that
allows easy access to the front of the printer.
Note: Never operate the printer resting on its side
or upside down.
2. Turn off the printer. Press the power switch on
the back of the printer to the off (O) position.
3. Place the power supply in a suitable location,
preferably on a table, near an electrical outlet.
4. Plug the three-hole end of the AC adapter cable
into the three-pronged outlet in the printer’s power
supply.
Caution: The printer’s power supply uses a
different voltage than the keypad.
To connect the wrong power supply could
permanently damage the keypad or the
printer.