Filter
Top Products
NPort 5110 Series User’s Manual Initial IP Address Configuration
3-6
8. Type m and then press Enter to return to the main menu.
9. Type s and then press Enter to Save/Restart the system.
10. Type y and then press Enter to save the new IP address and restart NPort 5110.
Serial Console (19200, n, 8, 1)
You may use the RS-232 console port to set up the IP address for NPort 5110. We suggest using
PComm Terminal Emulator, which is available free of charge as part of the PComm Lite program
suite (found on the Software CD that comes with the product), to carry out the installation
procedure, although other similar utilities may also be used.
Before you start to configure the NPort 5110 via serial console, turn off the power and connect the
serial cable from NPort 5110 to your computer’s serial port.