Filter
Top Products
NPort 5110 Series User’s Manual Initial IP Address Configuration
3-7
1. Connect NPort 5110’s serial port 1 directly to your computer’s male RS-232 serial port.
2. From the Windows desktop click on Start $ Programs $ PComm Lite $ Terminal
Emulator.
3. When the PComm Terminal Emulator window opens, first click on the Port Manager menu
item and select Open, or simply click on the Open icon.
4. The Property window opens automatically. From the Communication Parameter page,
select the appropriate COM port for the connection, COM1 in this example, and 19200 for
Baud Rate, 8 for Data Bits, None for Parity, and 1 for Stop Bits.
5. From the Property window’s Terminal page, select ANSI or VT100 for Terminal Type and
then click OK. If you select Dumb Terminal as the terminal type, some of the console
functions—especially the “Monitor” function—may not work properly.
6. Press the “ ` ” key continuously and then power on the NPort 5110.
7. NPort 5110 will receive the “ ` ” string continuously and then auto switch from data mode to
console mode.