Filter
Top Products
NPort 5110 Series User’s Manual Web Console Configuration
5-27
From E-mail address
Setting Factory Default Necessity
1 to 63 characters None Optional
E-mail address 1/2/3/4
Setting Factory Default Necessity
1 to 63 characters None Optional
ATTENTION
Consult your Network Administrator or ISP for the proper mail server settings. The Auto
warning function may not work properly if it is not configured correctly. NPort 5110 SMTP
AUTH supports LOGIN, PLAIN, CRAM-MD5 (RFC 2554).
SNMP Trap Server
SNMP trap server IP or domain name
Setting Factory Default Necessity
IP address or Domain Name None Optional
Event Type
Cold start
This refers to starting the system from power off (contrast this with warm start). When performing
a cold start, NPort 5110 will automatically issue an Auto warning message by e-mail, or send an
SNMP trap after booting up.
Warm start
This refers to restarting the computer without turning the power off. When performing a warm
start, NPort 5110 will automatically send an e-mail, or send an SNMP trap after rebooting.
Authentication failure
The user inputs a wrong password from the Console or Administrator. When authentication failure
occurs, NPort 5110 will immediately send an e-mail or send an SNMP trap.