Filter
Top Products
C168P User’s Manual 2-1
2
2
2 Hardware Installation
The installation of the C168P consists of hardware and software installation. The
hardware installation is detailed in this chapter. The next chapter deals with the
software installation for various operating systems.
Default Settings
The C168P has the following default (factory) settings:
I/O address:
0x180 (Port 1), 0x188 (Port 2), 0x190 (Port 3), 0x198 (Port 4)
0x1A0 (Port 5), 0x1A8 (Port 6), 0x1B0 (Port 7), 0x1B8 (Port 8)
IRQ: 10
INT Vector: 0x1C0
CAP Jumper JP1: Open
Note ! If the default settings above are what you desire and good for the
system without conflicts, you may simply install the board in the
system and go directly to the next chapter, “Software Installation”.
Otherwise, follow the instructions below.
JP1
C168P