Filter
Top Products
Software Installation
C168P User’s Manual 3-3
5. Select “MOXA Smartio/Industio Family multiport board” in the “Select
OEM Option” dialog box, and then click [
OK] to enter the “Moxa
Smartio/Industio Configuration Panel
” dialog box to start the installation.
6. In the “Moxa Smartio/Industio Configuration Panel” dialog box, click [Add]
to enter “
Property” dialog box to add the C168P board. Select the “C168
Series
” in the “Board Type” field. If necessary, type the desired interrupt vector
address, in the “INT Vector” field. Select the desired interrupt number in the
“Interrupt No.” field. Type the desired base I/O address, in the “Base I/O Port
Address” field. All the settings should match settings that are physically set on
the board and conflict with no other devices.